Sonali Solar 200 Watts 12 Volts Monocrystalline Kit with 30A PWM LCD Charge Contro
Sonali Solar 200 Watts (200 W X 1 Pc) 12 Volts Monocrystalline Solar Kit w/ 30A PWM LCD Charge Controller, 12Ft 10AWG Connector Cables, Clamps and Nylok Screws No. The kit includes 1 pack 200 Watt 12 Volt Monocrystalline Solar Panel, 30 Amp 12V/24V PWM Solar Charge Controller with LCD Display, 12Ft 10AWG Solar Panel and Panel to Controller Connector Cables, 12FT 10AWG Controller and Battery Connector Cables with Clamps and Nylok screws No.
Anti-reflective, high transparency, low iron-tempered glass with enhanced stiffness and impact resistance. IP65 rated junction box provides complete protection against environmental particles and low pressure water jets. Pre-drilled holes on the back of the panel allow for fast mounting and securing.
Compatible with different mounting systems such as Z-brackets, Pole Mounts, and Tilt Mounts. Can be used for many different applications - Water Pumping Systems, Signaling Systems, Residential and Commercial Rooftops, Awning & Canopies, Solar Farming, Street lights, Car ports, Solar Mobile Van, Solar Boat, Balconies, Solar Kit, Fences and other off-grid applications. Integrated manufacturing of cells & modules in the production line guarantees optimum performance. Nominal Maximum Power (Pmax) 200W (12V). Optimum Operating Voltage (Vmp) 23.56. Optimum Operating Current (Imp) 8.49. Open Circuit Voltage (Voc) 27.76. Short Circuit Current (Isc) 9. Weight 14.5 Kg / 32.0 lbs. Front Cover (Tempered Glass) 3.2mm. Mounting Holes Pitch (Y)-mm 317. Mounting Holes Pitch (X)-mm 645. 1 x 200 Watt Monocrystalline Solar Panel. 1 x 30A PWM LCD Charge Controller. 1 x 12ft 10AWG Panel to Controller Cables (one pair). 1 x 12ft 10AWG Controller to Battery Cables (one pair).With Clamps and Nylok screws No. 30 Amp 12V/24V solar charge controller is a common positive ground controller. This controller is an intelligent and multifunctional solar charger controller. These serial products adopt customized LCD display screens, which make operations on the interface rather convenient. All of the controlling parameters can be reset to satisfy user needs.
Charge /Discharge Current 30 Amp. Battery Voltage 12 V/24 V Auto.
Float Charge 13.7 V. Discharge Stop 10.7 V.Discharge Reconnect 12.6 V. Water Pumping Systems, Signalling Systems, Residential and Commercial Rooftops, Awning & Canopies, Solar Farming, Street lights, Car ports, Solar Mobile Van, Solar Boat, Balconies, Solar Kit, Fences and other off-grid applications. The item "Sonali Solar 200 Watts 12 Volts Monocrystalline Kit with 30A PWM LCD Charge Contro" is in sale since Sunday, April 11, 2021.
This item is in the category "Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Solar Power Supplies\Solar Panels & Kits". The seller is "sungen_42" and is located in North Bergen, New Jersey.This item can be shipped to United States.
- Current Rating: 8.51-9 A
- Model: Sonali Solar 200W Kit
- Cell Quantity: 31-40
- Connector Type: MC4
- Wattage: 200W
- Current Type: DC
- System Configuration: Off-Grid
- Material: Monocrystalline
- Power Source: Solar
- Type: Solar Panel Kit
- Features: All Daylight Conditions
- MPN: 200WKit
- Recommended Environment: Outdoor
- Item Length: 60
- Pliability: Rigid
- Power: 200W
- Current Output: 10 A or Less
- Brand: Sonali Solar
- Solar Technology: Monocrystalline
- Application: DIY
- Charging Mode: PWM (Pulse Width Modulation)
- Resistance Properties: Abrasion Resistant
- Voltage: 12V