DC 12Volt Single Axis Solar Tracker Controller W/ Linear Actuator Anemometer Kit. Optional B: Only 1 Set Solar Tracker Controller. Only 1PCS Wind Speed Sensor. 1PCS 1500N DC 12V Linear Actuator + Mounting Brackets + Solar Tracker Controller +.
Notes: Pls check each mode carefully and choose the right mode as you need! Note 1: The battery in the photo is only for reference and is not included in the package. Note 2: Make sure the input voltage for the whole system is DC 12V and the input current is no less than 5A. Nemometer has only two wires, just connect the two wires and then it can work normally.
Note 4: The Limit port on the controller is not. Necessary to use unless extra limit switch is needed. Note: Please check the dimensions carefully and choose the right size as you need.26 ° C +65 ° C. For more details of the Linear Actuators. This is WST03-5 Single Axis Solar Tracker Controller, the main function is to control the single axis (oblique single axis). System to track the sunlight. Items include the LCD controller box, light sensor&3 meters wire and IR (infrared) remote.
145x90x40mm (5.71"x3.54"x1.57). High tracking accuracy, average tracking accuracy = 1° (Actual accuracy is related to the platform's moving speed). The light sensor has a wide range of detection angle and high accuracy. It's inside the waterproof case, waterproof, dustproof and anti-aging. With LCD display which can show multiple working modes and parameters.Many of the parameters can be set Tracking accuracy, threshold value of the light sensor, threshold value of the wind speed sensor, the interval time of cyclical tracking, etc... With strong wind protection mode (Wind speed sensor is required). Can set the platform stay at any position at night (or cloudy day). Can be operated by IR remote control or the buttons on the controller box. Reverse battery protection, over-current protection; standby current =15mA. For more details of the Single Axis Solar Tracker Controller. This wind speed sensor is composed of a shell, three wind cups and a circuit module. The whole sensor has a high strength, weather resistance, corrosion resistance and water resistance, will be to ensure the long-term use of the instrument, and the accuracy of the wind speed collection. It is very suitable for outside measurement. Start-up Wind Speed: 0.2-0.4 m/s. Wind Speed: (Output voltage2 /5)32.4m/s. For more details of the Wind Speed Sensor. Single axis tracker provides up to 35% more power production. Engineered to hold up to 1000 Watts of solar panels. The Input Voltage for the whole system should be DC 12V.
Never approach a solar tracker while the. The solar tracker can move unexpectedly and the. Powerful linear actuator/motor can cause serious injury or death. Always disconnect the Solar Tracker electronics from its power supply before approaching the solar tracker.
Solar tracking system: Solar photovoltaic System, solar thermal system, etc. Additional information and detailed instructions can be found in the User's Manual. Buyers are responsible for undeliverable order due address mismatch. This item is in the category "Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Solar Power Supplies\Solar Panels & Kits". The seller is "szmwkj" and is located in this country: US.
This item can be shipped to United States.