Maximum power current(Imp) 3.12A. Standard Test Conditions : lrradiance 1000w/m^2, Temperature 25? Batt voltage:12V/24V auto Charge current: 10A Discharge current:10A USB output:5V/2A Self-consume. Peak Load Power Rate:1000w. Input DC Voltage Range: DC9.7V-15.5V, 20V-30V.High voltage cutoff level:15V+/-0.5V, 30V+/-0.5V. Low voltage Cutoff level:10V+/-0.3V, 20V+/-0.3V.
Low voltage Alarm Level:11V+/-0.5V, 21V+/-0.5V. Overload and Short Circuit Protection: YES. Output Waveform:Modified sine wave. Cooling fan:Cooling fan Product size:166.79555mm. & Thin and flexible & Efficient & Lightweight & Tough and durable & Cost effective & No mouting structure required & Designed for the harsh environment.
First wiring, connect the controller to the battery. First connect cable with alligator clips to controller by screwdriver. Then connect alligator clips(black) to the negative pole of the battery, next connect alligator clips (red) to the positive pole of the battery, pay attention to the positive and negative poles.
After correct connection, the controller will display the voltage parameters of battery. Second wiring, connect the flexible solar panels to the controller. First connect extend cable to the controller by screwdriver. Then connect connect parallel adapter to the solar panel.If there is only one panel, please ignore this step. Next connect parallel adapter to extend cable. Taking care when connecting & disconnecting the connector to avoid damage. Afetr right connection, the controller will display the solar panel is charging the battery. The third step is to connect the DC load to the controller 4. Forth step, connect the invertor to the battery for AC output. This item is in the category "Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Solar Power Supplies\Solar Panels & Kits". The seller is "heygreenpower" and is located in this country: US.
This item can be shipped to United States.