The sinusPRO 2000 S 24V emergency power supply is used to supply electrical devices requiring 230V alternating voltage from 24V DC batteries. It can also be successfully used as an emergency source of energy for devices requiring continuous power supply, such as furnaces and central heating pumps. In one housing with a color display is placed. 20 A mains charger for charging batteries.
30 A MPPT solar controller for charging batteries from a set of solar panels. SINUS pure converter based on a toroidal transformer. The toroidal transformer used in the construction of the power supply compensates for various reactive power of loads (capacitive, inductive and resistive loads can be combined) and reacts very flexibly to overloads (starting of pumps, compressors, motors).
The inverter can operate in UPS mode, which ensures continuous and trouble-free operation of blowers, feeders, pumps etc. The S series has a solid and elegant housing and additionally direct access to solar panels and a priority switch for solar / network operation. The refreshed version of sinusPRO 2000S has a button that allows you to turn off or turn on the charger.Thanks to this, we can turn off charging leaving BYPASS function active. In solar mode and with the AC charger turned off, after discharging the battery (at night when there is no charging), the UPS will switch to BYPASS mode without charging the battery. Pure sinusoidal output signal, thanks to which the power supply is compatible with, among others: refrigerators, freezers, fareettes, TV sets, fluorescent lamps, fluorescent lamps etc.
Construction based on an efficient toroidal transformer. Dual control of the main processor. MPPT solar charger (controller) with very high efficiency.
Wide input frequency range, automatic 50/60 Hz detection. Intelligent switching between the priorities of the power supply for better performance and less energy loss.Full range of protections and alarms: overload, short circuit, over and under voltage, temperature protection. Easy-to-use display that provides a preview of the most important functions.
A feature that distinguishes sine converters from classic simple AC / DC converters is the production of an alternating voltage with a sinusoidal waveform, identical to that in the power network. This makes it possible to power devices equipped with electric motors and transformers, such as power tools, pumps and low-power home appliances. Simple, cheap converters actually produce rectangular voltage, sometimes incorrectly called "modified sine wave". Such voltage is not suitable for powering devices of inductive or capacitive nature and may cause their damage. The power supplies from this series are "line-interactive" power supplies and can reverse the voltage polarity at the output when switched to battery power.Total power (instantaneous) 2000 VA. Rated power (continuous) 1400 W. Cooperation with solar panels Yes (built-in solar controller). Charging current (network) 20 A. Working temperature 0-40 degrees Celsius.
Permitted supply voltage range Switching to battery supply occurs when the mains voltage is lower than 160 V (+ - 5 V) or higher than 260 V (+ - 5 V). Supply voltage frequency 45 Hz 65 Hz. Output voltage range Mains voltage regulator: 204 - 240 V, uninterruptible power supply UPS: 230 V (+ - 3%). UPS output voltage frequency 50 Hz (+ - 0.5 Hz). Overload protection (battery supply) In the case of 110% - 130% overload, the power is disconnected after 30 s.
If the overload is higher than 130%, the power is disconnected immediately. Overload protection (mains supply) The device warns of overloading until the fuses are triggered.
Permissible humidity 10% RH 90% RH. The item "VOLT UPS power inverter SINUSpro 2000S 24V SOLAR INVERTER 2000VA 1400W" is in sale since Tuesday, September 10, 2019. This item is in the category "Heimwerker\Erneuerbare Energie\Solarenergie\Photovoltaik-Zubehör\Solarmodule".
The seller is "audiopioneer_pl" and is located in Warszawa, MAZOWIECKIE. This item can be shipped worldwide.